1·A larger air filter is employed to reduce the noise of suction gas.
采用较大的空气滤器减少了进气噪音。
2·A new type of high efficient liquid-gas jet pump with ring-shape noozle and two-side suction gas is presented.
本文提出了环形双侧吸气新型高效液气射流泵。
3·Suction gas pressure goes up as the compressor run at the lower speed in the lower burthen, and this is beneficial to lower systems energy-consume.
在负荷较小时，压缩机采用低速运转，吸气压力升高，这对系统降低能耗是有利的；
4·The latest style large capacity muffle with special structure has reduced the noise of exhaust gas. A larger air filter is employed to reduce the noise of suction gas.
新型大容量和特殊内部构造消音器降低了排气噪音。采用较大的空气滤器减少了进气噪音。
5·This paper presents the analysis of suction gas superheat loss in the shell of hermetic refrigerating compressors and its quantitative calculation when the R12 is used as a refrigerant.
本文对全封闭压缩机的吸入汽体在机壳内的加热进行了分析，并以R 12为工质进行了定量计算。
6·A failure to maintain two ECCS trains operable due to gas accumulation in the charge and pump suction line. Self-identified, if you identify it by yourself you get credit.
一个违例保持2个ECCS轨道是可操作的,由于气体的累积，在充电和,泵吸线路，自我确定，如果你们确定，你们就能得到赞誉。
7·In the compressor suction mouth increase a gas-liquid separator is the effective way to solve this problem, especially in the inverse heat cycle defrosting the heat pump units.
在压缩机吸气口增加气液分离器是解决这个问题的有效办法，尤其是在采用逆循环热气除霜的热泵机组中。
8·It would be better placed on pump suction fluid entering the bottom layer of segment, if placed in the top of the gas separator should be used.
最好是将泵吸入口置于流体进入层段的下方，若置于上方则应使用气体分离器。
9·Gas from entering the spiral cavity suction tank by compression and exhaust through the exhaust orifice discharge cavity.
气体由吸气腔进入螺槽内，经压缩后通过排气孔口和排气腔排出。
10·Gas (working fluid) from entering the spiral cavity suction tank by compression and exhaust through the exhaust orifice discharge cavity.
气体(工质)由吸气腔进入螺槽内，经压缩后通过排气孔口和排气腔排出。